Please use this identifier to cite or link to this item: http://ri.uaemex.mx/handle20.500.11799/39319
DC FieldValueLanguage
dc.creatorAGUSTIN CABRAL PRIETO-
dc.creatorJUAN ANTONIO CONTRERAS VITE-
dc.creatorIRMA MARIA ENGRACIA GARCIA SOSA-
dc.creatorNOEL NAVA PERALTA-
dc.creatorFEDERICO GABRIEL GARCIA SANTIBAÑEZ SANCHEZ-
dc.date2010-
dc.identifierhttp://hdl.handle.net/20.500.11799/39319-
dc.descriptionThe Vickers micro-hardness of this alloy was unusually dependent on the heat treatment from 300 to 634K, inferring important micro-structural changes and the presence of amorphous grains before its phase transition. Once the alloy is crystallized, the micro-hardness is characteristic of a brittle alloy, the main problem of these alloys. Within the amorphous state, other properties like free-volume, magnetic states and Fe-Fe distances were followed by PALS and MS, respectively, to analyze those micro-structural changes, thermally induced, which are of paramount interest to understand their brittleness problem.-
dc.formatapplication/application/pdf-
dc.languageeng-
dc.publisherSociedad Química de México-
dc.relationhttp://www.redalyc.org/revista.oa?id=475-
dc.rightsinfo:eu-repo/semantics/openAccess-
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0-
dc.sourceJournal of the Mexican Chemical Society (México) Num.1 Vol.54-
dc.subjectquímica-
dc.subjectamorphous alloys-
dc.subjectMössbauer pectroscopy-
dc.subjectannihilation of positrons-
dc.subjectfree-volume-
dc.subjectdefects-
dc.subjectmicro hardness-
dc.subjectbrittleness-
dc.subjectinfo:eu-repo/classification/cti/2-
dc.titleSpectroscopic and mechanical studies on the Fe-based amorphous alloy 2605SA1-
dc.typearticle-
dc.audiencestudents-
dc.audienceresearchers-
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:Producción
Show simple item record

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.