Menú

ListarCientífica por materia "Polymer concrete"

Ordenar por:Orden:Resultados:

  • Performance improvement of polymer concrete produced with unsaturated resin, by a post-cure process, polyester fibers and gamma radiation 
    Martínez-Barrera, Gonzalo; GENCEL, Osman; Martínez-López, Miguel (Journal of Building Engineering, 2022-09-24)
    As it is known, production of polymer concrete contemplates polymer resins as main component, for example polyester or epoxy; as well as mineral aggregates, including silica sand and marble. However, it is not common to ...
  • Polyester polymer concrete modified by polyester fibers and gamma rays 
    Martínez-Barrera, Gonzalo; GENCEL, Osman; Martínez-López, Miguel (Elsevier, 2022-09-30)
    As is well-known, polymer concrete is manufactured by mixing a thermosetting resin, such as polyester, and mineral aggregates, such as silica sand and marble. Such concrete presents low levels of ductility, and its ...
  • Polymer concrete reinforced with luffa fibers: effect of gamma radiation 
    MARTINEZ BARRERA, GONZALO; MARTINEZ LOPEZ, MIGUEL; VIGUERAS SANTIAGO, ENRIQUE; OSMAN, GENCEL; BEYCIOGLU, AHMET; LAREDO DOS REIS, JOAO MARCIANO (Rev. Téc. Ing. Univ. Zulia, 2014-03-01)
    The interest of many research groups regarding manufacture of composite materials by using natural fibers is increasing world-wide. The main objectives involve the improvement of mechanical properties, mainly those related ...
  • Waste materials from Tetra Pak packages as reinforcement of polymer concrete 
    MARTINEZ LOPEZ, MIGUEL; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; UREÑA NUÑEZ, FERNANDO; BROSTOW, WITOLD KONRAD (Hindawi, 2015-09-01)
    In this work, different concentrations (from 1 to 6 wt%) and sizes (0.85, 1.40 and 2.36 mm) of waste Tetra Pak particles replaced partially silica sand in polymer concrete. As is well known Tetra Pak packages are made up ...

Buscar en RI


Buscar en RI

Usuario