Listar Científica por fecha de publicación

Ordenar por:Orden:Resultados:

  • Chacón García, Luis; Cuevas Yáñez, Erick; Corona Becerril, David; Tapia Juárez, Melissa; González Campos, Betzabe; Contreras Celedón, Claudia (The Royal Society of Chemistry, 2014-01-05)
    The synthesis of a novel 2-dipyrrolyl-2,5-dimethyl-p-benzoquinone is described, and its interactions with fluoride were characterized. An unprecedented interaction between fluoride anions and the quinone ring was observed.
  • BARRERA DIAZ, CARLOS EDUARDO; VARELA GUERRERO, VICTOR; CUEVAS YAÑEZ, ERICK; MARTINEZ BARRERA, GONZALO; ROA MORALES, GABRIELA; GARCIA MORALES, MARCO ANTONIO (International Journal of ELECTROCHEMICAL SCIENCE, 2014-01-05)
    This work evaluates the use of aluminum contained in the aluminum-polyethylene films as anodic electrodes using the electrocoagulation technique to reduce the pollutants contents of an industrial wastewater quickly and ...
  • Gencel, Osman; Del Coz-Díaz, Juan José; Sutcu, Mucahit; Koksal, Fuat; Alvarez Rabanal, Felipe; Martínez-Barrera, Gonzalo; Brostow, Witold (Energy and Buildings, 2014-02-01)
    We have added expanded vermiculite and polypropylene fibers with low thermal conductivity to light weight gypsum. Thermal conductivity of the composites decreases on addition of vermiculite aspore-maker. Physical and ...
  • Martínez-Barrera, Gonzalo; Martínez Hernández, Ana; Velasco Santos, Carlos; Martínez-López, Miguel; Ortíz Espinoza, Jesús; Laredo dos Reis, João Marciano (Smithers Group Company, 2014-02-01)
    Design of polymer concrete involves extensive studies on their materials in order to get improved properties; specifically on the physicochemical properties of both polymer resin and mineral aggregates, including size and ...
  • Martínez-Barrera, Gonzalo; Martínez-López, Miguel; Vigueras Santiago, Enrique; Gencel, Osman; Beycioglu, Ahmet; Laredo dos Reis, João Marciano (Rev. Téc. Ing. Univ. Zulia, 2014-03-01)
    The interest of many research groups regarding manufacture of composite materials by using natural fibers is increasing world-wide. The main objectives involve the improvement of mechanical properties, mainly those related ...
  • HERRERA SOSA, EDUARDO SADOT; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; CRUZ ZARAGOZA, EPIFANIO (Hindawi, 2014-03-01)
    In polymer reinforced concrete, the Young’s modulus of both polymers and cement matrix is responsible for the detrimental properties of the concrete, including compressive and tensile strength, as well as stiffness. A novel ...
  • Gutiérrez Segura, Edith Eriela; SOLACHE RIOS, MARCOS JOSE; COLIN CRUZ, ARTURO; FALL, CHEIKH (Water Air Soil Pollut, 2014-05-11)
    Carbonaceous material obtained from industrial sewage sludge and Na-zeolitic tuff were used to adsorb cadmium from aqueous solutions in column systems. The Bohart, Thomas, Yoon–Nelson, and mass transfer models were ...
  • Hoyos, Leidy; Mesa, Monica; Ramirez, Alejandro; Vigueras-Santiago, Enrique; López-Téllez, Gustavo (Jesús García-Serrano, Ana Ma. Herrera-González, Juan Coreño-Alonso and Edgar Cardoso-Legorreta, 2014-06-03)
    The use of aniline as carbon source has two advantages for the synthesis of carbon materials exhibiting conducting properties: the aromatic ring contributes to the graphitic character and the presence of nitrogen could ...
  • Moreno Marcelino, José Encarnación; Vigueras Santiago, Enrique; López Téllez, Gustavo; Hernández López, Susana (Journal of Nano Research, 2014-06-06)
    This work presents the study of the electrical conductivity in MWNT as a function of three different chemical functionalization conditions. Unmodified and chemically modified MWNT were characterized by microRaman ...
  • NAVARRO PARDO, FABIOLA; Martinez_Hernandez, Ana L.; Castaño Meneses, Víctor Manuel; MEDELLIN RODRIGUEZ, FRANCISCO JAVIER; MARTINEZ BARRERA, GONZALO; VELASCO SANTOS, CARLOS (Hindawi, 2014-07-01)
    Carbon nanotubes (CNTs) and graphene were used as reinforcing fillers in nylon 6,6 in order to obtain nanocomposites by using an injection moulding process. The two differently structured nanofillers were used in their ...
  • Glorias-Garcia, Fabiola; Arriaga-Merced, José Miguel; Roa-Morales, Gabriela; Varela-Guerrero, Víctor; Barrera-Díaz, Carlos Eduardo; Bilyeu, Bryan (Journal of Industrial and Engineering Chemistry, 2014-07-25)
    Hexavalent chromium is challenging to remove from industrial wastewater due the solubility and anionic nature of the chromates. Cr(VI) is typically removed by reduction to Cr(III), then precipitation or adsorption, which ...
  • DAVILA ESTRADA, ANGIE MICHELLE (Universidad Autónoma del Estado de México, 2014-09)
    La zeolita clinoptilolita es un material de relativa abundancia en México, la cual posee propiedades de intercambio iónico. La superficie externa de las zeolitas puede modificarse con surfactantes catiónicos; lo cualle ...
  • OLEA MEJIA, OSCAR FERNANDO; CONTRERAS BULNES, ROSALIA; ZAMUDIO ORTEGA, CARMEN MARIA; MORALES LUCKIE, RAUL ALBERTO; OLEA CARDOSO, OSCAR; LOPEZ CASTAÑARES, RAFAEL (© FORMATEX 2014, 2014-09-17)
    Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Sperctroscopy (EDS) are two analysis techniques that are widely used to study all kinds of solid samples, from inorganic to biological. They are used to ...
  • Betancourt Gómez, Pedro (Universidad Autónoma del Estado de México, 2014-10-07)
    En la actualidad, uno de los enfoques del diseño, está centrado en la búsqueda de nuevas y mejores opciones en el empleo de materiales empleados para la fabricación de mobiliario doméstico. La finalidad de esta investigación, ...
  • ALVARADO ROLON, OSCAR (2014-11-06)
    La fotocatálisis es un proceso que se basa en la absorción de la energía radiante visible o ultravioleta por un fotocatalizador, el cual promueve la reacción de fotoxidación. Esta tecnología se emplea para producir aldehídos ...
  • Luque Morales, Priscy Alfredo; Castro Beltran, Andres; Vilchis Nestor, Alfredo Rafael; Olivas Sarabia, Amelia; Quevedo-Lopez, M.A. (Elsevier B.V., 2014-11-13)
    This work focuses on the study of zinc sulfide (ZnS) thin films prepared by chemical bath deposition. The effect of the pH ranging from 10.0 to 10.75 on quality of ZnS thin films on SiO2 substrate is investigated. The ...
  • Barrera-Díaz, Carlos Eduardo; Varela Guerrero, Víctor; Gonzalez-Rivas, Nelly; Ureña-Nuñez, F (International Journal of Environmental Science and Technology, 2014-11-25)
    This work evaluates the use of aluminum contained in the aluminum–polyethylene films as anodic electrodes using the electrocoagulation technique to reduce the pollutant contents of industrial wastewater quickly and ...
  • CARRILLO LOPEZ, LUIS MANUEL; ZAVALETA MANCERA, HILDA ARACELI; VILCHIS NESTOR, ALFREDO RAFAEL; Soto Hernández, Ramón Marcos; ARENAS ALATORRE, JESUS ANGEL; TREJO TELLEZ, LIBIA IRIS; GOMEZ MERINO, FERNANDO CARLOS (Xuping Sun, 2014-11-25)
    Biosynthesis of silver nanoparticles (AgNPs) was achieved using extract of Chenopodium ambrosioides as a reducer and coating agent at room temperature (25∘C). Two molar solutions of AgNO3 (1 mM and 10 mM) and fie extract ...
  • VIGUERAS SANTIAGO, ENRIQUE; HERNANDEZ LOPEZ, SUSANA; HERNANDEZ ESCOBAR, CLAUDIA ALEJANDRA; ZARAGOZA CONTRERAS, ERASTO ARMANDO; FARIAS MANCILLA, JOSE RURIK (ScienceDirect, 2014-12-31)
    Study of the sensing parameters: sensibility, response and recuperation times to hexane vapors for layers of different thickness of poly(butadiene) + carbon black (CB) composites is presented. The results show that sensibility ...
  • SANCHEZ MUÑOZ, HUGO ERNESTO (Universidad Autónoma del Estado de México, 2015)
    En esta investigación se identifican los patrones espaciales de las partículas suspendidas (PM10) en la Zona Metropolitana de Toluca, en el periodo 2011 - 2013, la información se obtuvo de la Red Automática de Monitoreo ...

Buscar en RI


Buscar en RI

Usuario