Menú

Listar Científica por autor "MARTINEZ BARRERA, GONZALO"

Ordenar por:Orden:Resultados:

  • Artificial Intelligence Methods and Their Applications in Civil Engineering 
    MARTINEZ BARRERA, GONZALO; OSMAN, GENCEL; BEYCIOGLU, AHMET; subasi, serkan; GONZALEZ RIVAS, NELLY MA DE LA PAZ (IGI Global, 2015)
    Simulation of material properties generally involves the development of a mathematical model derived from experimental data. In structural mechanics and construction materials contexts, recent experiments have reported ...
  • Characterization of recycled polycarbonate from electronic waste and its use in hydraulic concrete: improvement of compressive performance 
    DE LA COLINA MARTINEZ, ANA LAURA; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; Ávila Córdoba, Liliana Ivette; UREÑA NUÑEZ, FERNANDO (Techno Press, 2017-11-01)
    Transparency, excellent toughness, thermal stability and a very good dimensional stability make Polycarbonate (PC) one of the most widely used engineering thermoplastics. Polycarbonate market include electronics, automotive, ...
  • Civil engineering applications of polymer composites 
    MARTINEZ BARRERA, GONZALO; OSMAN, GENCEL; LAREDO DOS REIS, JOAO MARCIANO (Hindawi, 2016-02-01)
    Researches have been done in order to improve performance of concrete and structures. As we know, polymers provide huge opportunities for the advancement of materials research, the improvement of material property, and the ...
  • Influence of 1D and 2D carbon fillers and their functionalisation on crystallisation and thermomechanical properties of injection moulded nylon 6,6 nanocomposites 
    NAVARRO PARDO, FABIOLA; Martinez_Hernandez, Ana L.; Castaño Meneses, Víctor Manuel; MEDELLIN RODRIGUEZ, FRANCISCO JAVIER; MARTINEZ BARRERA, GONZALO; VELASCO SANTOS, CARLOS (Hindawi, 2014-07-01)
    Carbon nanotubes (CNTs) and graphene were used as reinforcing fillers in nylon 6,6 in order to obtain nanocomposites by using an injection moulding process. The two differently structured nanofillers were used in their ...
  • Materiales de reciclo y su uso en el mejoramiento del concreto 
    MARTINEZ BARRERA, GONZALO; VIGUERAS SANTIAGO, ENRIQUE; MARTINEZ LOPEZ, MIGUEL; OSMAN, GENCEL (EON, 2015)
    Atendiendo a la regla de las “tres erres” (reducir, reciclar y reusar), cuya meta consiste en establecer una sociedad orientada al reciclaje, en este capítulo se aborda la problemática de los materiales de desecho y su uso ...
  • Materiales provenientes del reciclamiento de envases de Tetra Pak y su uso en concreto 
    MARTINEZ LOPEZ, MIGUEL; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; UREÑA NUÑEZ, FERNANDO (OmniaScience, 2015)
    Son escasos los estudios que involucran el uso de los materiales de reciclo de envases de Tetra Pak. No obstante, se ha estudiado la viabilidad del uso de polietleno de baja densidad (LDPE) y el aluminio reciclados de ...
  • Materiales reciclados de llantas automotrices y la radiacion gamma en el mejoramiento del concreto 
    HERRERA SOSA, EDUARDO SADOT; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; CRUZ ZARAGOZA, EPIFANIO (OmniaScience, 2015)
    El concreto es uno de los materiales más importantes dentro de la industria de la construcción, esto se debe no solo a su costo sino a las propiedades que presenta como su fácil colocación antes del fraguado, su resistencia ...
  • Micro-encapsulados a base de gomas arábiga y de mezquite y su modificación mediante radiación gamma 
    MARTINEZ BARRERA, GONZALO; PEREZ ALONSO, CESAR; ORTIZ ESPINOZA, JESUS; Avilés Benítez, Luis (EON, 2015)
    El uso de radiación ionizante ha tomado auge en las últimas décadas en diferentes áreas de aplicación, en materiales, medicamentos y alimentos, entre otros. Su aplicación en alimentos se realiza en dosis controladas, con ...
  • Modeling and scaling up of the Cr(VI) adsorption process by using mexicalcite natural mineral in a packed bed column 
    CRUZ OLIVARES, JULIAN; PEREZ ALONSO, CESAR; MARTINEZ BARRERA, GONZALO; ROA MORALES, GABRIELA; LOPEZ TELLEZ, GUSTAVO; Martín del Campo López, Eduardo (Results in Engineering, 2022-10-07)
    The natural mineral known as Mexicalcite is native to the southern region of Mexico, and due to its abundance and accessibility characteristics, as well as its insolubility in water, it is recommended as an adsorbent ...
  • Novel Porous Materials Solution for Instability Decrease of Problem Soils under Buildings 
    LOPEZ LARA, TERESA; HERNANDEZ ZARAGOZA, JUAN VOSCO; CARREON FREYRE, DORA CELIA; ROJAS GONZALEZ, EDUARDO; MARTINEZ BARRERA, GONZALO; HORTA RANGEL, JAIME MOISES; RODRIGUEZ MORALES, NORMA PAULINA (Wulfenia Org, 2015-10-01)
    Problem clay soils represent a great cracking problem for all light buildings over them because of volumetric instability caused by variations in moisture. A generalized solution has been to extract them and substituted ...
  • PET de desecho y su uso en concreto 
    Ávila Córdoba, Liliana Ivette; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; UREÑA NUÑEZ, FERNANDO; LOZA YAÑEZ, JORGE ALEJANDRO (OmniaScience, 2015)
    En este capítulo se describen investigaciones sobre el uso de la radiación como tecnología alternativa para la modificación fisicoquímica de PET de desecho y su uso en el concreto, como sustituto de los agregados minerales ...
  • Polymer concrete reinforced with luffa fibers: effect of gamma radiation 
    MARTINEZ BARRERA, GONZALO; MARTINEZ LOPEZ, MIGUEL; VIGUERAS SANTIAGO, ENRIQUE; OSMAN, GENCEL; BEYCIOGLU, AHMET; LAREDO DOS REIS, JOAO MARCIANO (Rev. Téc. Ing. Univ. Zulia, 2014-03-01)
    The interest of many research groups regarding manufacture of composite materials by using natural fibers is increasing world-wide. The main objectives involve the improvement of mechanical properties, mainly those related ...
  • Polymer waste materials as fillers in polymer mortars: experimental and finite elements simulation 
    MARTINEZ LOPEZ, MIGUEL; MARTINEZ BARRERA, GONZALO; del Coz Diaz, Juan Jose; MARTINEZ MARTINEZ, JUAN ENRIQUE; GENCEL, Osman; VARELA GUERRERO, VICTOR (Case Studies in Construction Materials, 2018-05-20)
    Serious environmental problems are due to large amounts of polymer waste, which are mostly thrown into landfills. As we known, polymer composites has been used to produce a variety of products like acid tanks, manholes, ...
  • Polypropylene Fiber Reinforced Polymer Concrete: effect of gamma radiation 
    MARTINEZ BARRERA, GONZALO; Martinez Hernandez, Ana; VELASCO SANTOS, CARLOS; MARTINEZ LOPEZ, MIGUEL; ORTIZ ESPINOZA, JESUS; LAREDO DOS REIS, JOAO MARCIANO (Smithers Group Company, 2014-02-01)
    Design of polymer concrete involves extensive studies on their materials in order to get improved properties; specifically on the physicochemical properties of both polymer resin and mineral aggregates, including size and ...
  • Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results 
    OSMAN, GENCEL; del Coz Diaz, Juan Jose; Sutcu, Mucahit; KÖKSAL, Fuat; MARTINEZ BARRERA, GONZALO; BROSTOW, WITOLD KONRAD (Energy and Buildings, 2014-02-01)
    We have added expanded vermiculite and polypropylene fibers with low thermal conductivity to light weight gypsum. Thermal conductivity of the composites decreases on addition of vermiculite aspore-maker. Physical and ...
  • Properties of lightweight concrete blocks with waste zeolitic tuff 
    MARTINEZ BARRERA, GONZALO; BROSTOW, WITOLD KONRAD; OSMAN, GENCEL; tekin, ilker; Kotan, Türkay; Osmanson, Allison (Kaunas University Technology, 2020-10-12)
    El artículo presenta el estudio de los efectos de la ceniza volcánica en las propiedades mecánicas y térmicas de blocks de concreto ligero.
  • Recovery and modification of waste tire particles and their use as reinforcements of concrete 
    HERRERA SOSA, EDUARDO SADOT; MARTINEZ BARRERA, GONZALO; BARRERA DIAZ, CARLOS EDUARDO; CRUZ ZARAGOZA, EPIFANIO; UREÑA NUÑEZ, FERNANDO (Hindawi, 2015-08-01)
    Environmental pollution caused by solid wastes is increasing in the last decades; one of these is referred to automotive tires, which are recycled by differentmethods, includingmechanical grinding. One of the most recurrent ...
  • Recycled cellulose from Tetra Pak packaging as reinforcement of polyester based composites 
    MARTINEZ BARRERA, GONZALO; MARTINEZ LOPEZ, MIGUEL; GONZALEZ RIVAS, NELLY MA DE LA PAZ; del Coz Diaz, Juan Jose; Ávila Córdoba, Liliana Ivette; Reis, João; OSMAN, GENCEL (Elsevier, 2017-12-12)
    Addressing the environmental problems caused by waste generated by Tetra Pak packaging, in this work, polyester based composites with 80% of polyester resin and 20% of silica sand were elaborated; where the silica sand was ...
  • SEM, AFM and CLSM microscopic techniques as tools for characterization of cellulose, polyaluminum and aluminum recovered from Tetra Pak packaging 
    BARRERA DIAZ, CARLOS EDUARDO; Ávila Córdoba, Liliana Ivette; UREÑA NUÑEZ, FERNANDO; MARTINEZ BARRERA, GONZALO; VARELA GUERRERO, VICTOR; ROSALES HERNANDEZ, LILIANA (Formatex Research Center, 2017)
    In this chapter, the characterization of the morphological features of sub-products of Tetra Pak packaging using SEM, AFM and CLSM microscopic techniques is presented. In a first step, the separation of the components of ...
  • Solvent effect in the polyethylene recovery from multilayer postconsumer aseptic packaging 
    CERVANTES REYES, ALEJANDRO; Núñez Pineda, Alexa; BARRERA DIAZ, CARLOS EDUARDO; VARELA GUERRERO, VICTOR; MARTINEZ BARRERA, GONZALO; Cuevas Yáñez, Erick (Waste Management, 2015-04-01)
    Polyethylene films were separated and recovered from polyethylene–aluminum composites derived from recycling multilayer postconsumer aseptic packaging. A brief study about the separation process by dissolving PE–aluminum ...

Buscar en RI


Buscar en RI

Usuario