E-peroxone process of a chlorinated compound: Oxidant species, degradation pathway and phytotoxicity

Abstract

An electro-peroxone (EP) process was conducted in an up-flow bubble column reactor with BDD electrodes. The efficiency of the process was tested in the 4-Chlorophenol (4-CPh) mineralization and compared with that attained by single treatments like ozonation (O3) and electro-oxidation (EO). At [TOC]o= 56 mg⋅L−1, pHo= 7.0, T = 293 K, j = 0.06 A⋅cm−2, t = 120 min, the oxidation power decreased in the following order EP>EO>O3, and the TOC removed was, in the same order, 100%> 93%> 40%. The calculated synergy coefficient was 0.31, while the mineralization current efficiency percentage (MCE%) and the energy consumption (EC) were 12.24% and 11.48%, 2.84 and 2.31 kW⋅h−1, for EP and EO, respectively. The germination percentage of Lactuca sativa, was 100%, 30% and 20%, at the end of EP, EO and O3, respectively. This indicates that phytotoxicity, was only eliminated with EP. Based on the by-products, e.g. aromatic compounds (4-chlorocatechol, catechol, phenol, pbenzoquinone, hydroquinone) and carboxylic acids (maleic, formic, fumaric, succinic, oxalic, malonic and acetic acids) identified by UHPLC-UV/DAD and the changes of the concentration of chloride ion (Cl-), hypochlorite, chlorite, chlorate and perchlorate, a reaction pathway was proposed for the 4-CPh mineralization by the Eperoxone process. It was demonstrated that under the studied conditions both, hydrogen peroxide and ozone, are produced during EO. At the end of EO, H2O2, carboxylic acids and perhaps persulfates, are responsible for the phytotoxicity of the solution.