Effect of Boriding on the Mechanical Properties of AISI 1045 Steel

RODRIGUEZ CASTRO, GERMAN ANIBAL; CAMPOS SILVA, IVAN ENRIQUE; Martínez Trinidad, José Francisco; Figueroa López, Ulises; MELENDEZ MORALES, LUIS DANTE; VARGAS HERNANDEZ, JESUS

Mostrar el registro sencillo del objeto digital

dc.contributor.author	RODRIGUEZ CASTRO, GERMAN ANIBAL
dc.contributor.author	CAMPOS SILVA, IVAN ENRIQUE
dc.contributor.author	Martínez Trinidad, José Francisco
dc.contributor.author	Figueroa López, Ulises
dc.contributor.author	MELENDEZ MORALES, LUIS DANTE
dc.contributor.author	VARGAS HERNANDEZ, JESUS
dc.creator	RODRIGUEZ CASTRO, GERMAN ANIBAL; 166501
dc.creator	CAMPOS SILVA, IVAN ENRIQUE; 19488
dc.creator	Martínez Trinidad, José Francisco; 20250
dc.creator	Figueroa López, Ulises; 217340
dc.creator	MELENDEZ MORALES, LUIS DANTE; 294083
dc.creator	VARGAS HERNANDEZ, JESUS; 293801
dc.date.accessioned	2019-03-13T16:53:56Z
dc.date.available	2019-03-13T16:53:56Z
dc.date.issued	2009-03-17
dc.identifier.issn	1662-8985
dc.identifier.uri	http://hdl.handle.net/20.500.11799/99571
dc.description	Efecto en las propiedades mecánicas de un acero borurado 1045.	es
dc.description.abstract	Some mechanical properties of AISI 1045 borided steels were estimated in the present work. The boriding process was carried out by the powder pack method at 950°C with 8 h of treatment. The fatigue strength on borided notched specimens was evaluated with rotating bending tests (R=1) considering a stress concentration factor (Kt) of 2.53. Likewise, the presence of residual stresses in boride layers was established by the XRD technique. The Daimler-Benz Rockwell C test was used, also, to estimate the strength adhesion of the coated system. The results show a decrease in the fatigue strength of AISI borided steels due to the presence of high porosity in the layers. Finally, the Rockwell-C adhesion test showed no coating failure for the boride layer.	es
dc.language.iso	eng	es
dc.publisher	Trans Tech Publications	es
dc.relation.ispartofseries	Vol.;65
dc.rights	openAccess	es
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0
dc.subject	Boriding	es
dc.subject	Boride Layers	es
dc.subject	Fatigue strength	es
dc.subject	Adhesion	es
dc.subject	Residual stresses	es
dc.subject	Porosity	es
dc.subject.classification	INGENIERÍA Y TECNOLOGÍA
dc.title	Effect of Boriding on the Mechanical Properties of AISI 1045 Steel	es
dc.type	Artículo	es
dc.provenance	Científica	es
dc.road	Dorada	es
dc.organismo	Centro Universitario UAEM Valle de México	es
dc.ambito	Internacional	es
dc.cve.CenCos	30501	es
dc.cve.progEstudios	43	es
dc.audience	students	es
dc.audience	researchers	es
dc.type.conacyt	article
dc.identificator	7

Ficheros en el objeto digital

Nombre: 2009 Advanced ...

Tamaño: 427.7Kb

Formato: PDF

Ver documento

Este ítem aparece en la(s) siguiente(s) colección(ones)

Conacyt [10019]
Tecnológica y de Innovación [92]

Visualización del Documento

Título
Effect of Boriding on the Mechanical Properties of AISI 1045 Steel
Autor
RODRIGUEZ CASTRO, GERMAN ANIBAL
CAMPOS SILVA, IVAN ENRIQUE
Martínez Trinidad, José Francisco
Figueroa López, Ulises
MELENDEZ MORALES, LUIS DANTE
VARGAS HERNANDEZ, JESUS
Fecha de publicación
2009-03-17
Editor
Trans Tech Publications
Tipo de documento
Artículo
Palabras clave
Boriding
Boride Layers
Fatigue strength
Adhesion
Residual stresses
Porosity

Los documentos depositados en el Repositorio Institucional de la Universidad Autónoma del Estado de México se encuentran a disposición en Acceso Abierto bajo la licencia Creative Commons: Atribución-NoComercial-SinDerivar 4.0 Internacional (CC BY-NC-ND 4.0)

Mostrar el registro sencillo del objeto digital